✦Template Printable Ideas Insights

Metric Thread Sizes for Tapping Drills

By

Embarking on a DIY project or a professional endeavor that involves tapping and thread creation? Understanding and selecting the appropriate tapping drill sizes for metric threads is crucial for a successful outcome. This guide delves into the intricacies of tapping drill sizes in metric threads, ensuring that you're equipped with the correct tool for the job.

Before we dive into the specific tapping drill sizes, let's first establish a fundamental understanding of tapping and threading. Tapping is the process of creating an internal thread (female thread) in a material, typically a nut or a hole in a component. The tapping drill is a tool designed to create a precise, clean hole that, when tapped, will produce a thread of the desired pitch and form.

Metric Thread Standards and Sizes

The metric system, used extensively worldwide, follows a standardized thread pitch sequence known as the Unified Thread Standard (UTS). This system categorizes threads by their thread pitch (the distance between the teeth of a thread) and the major diameter (the outer diameter of the thread).

the table size chart for drill sizes is shown in red and black, with an arrow pointing
the table size chart for drill sizes is shown in red and black, with an arrow pointing
Tap Drill Charts
Tap Drill Charts
Metric Tap Drill Chart PDF | Printable Workshop Guide | Workshop Wall Tool
Metric Tap Drill Chart PDF | Printable Workshop Guide | Workshop Wall Tool

Metric threads typically range from M0.5 to M16, with pitch (P) values that are a multiple of 0.25mm for threads up to M6, and a multiple of 0.5mm for larger threads. Understanding these standards allows you to match the correct tapping drill to the thread size required.

Tapping Drill Sizes for Metric Threads

The tapping drill size selected must be slightly smaller than the official metric thread size. This is to account for the material removed during the tapping process. The tapping drill size is calculated using the following formula: ``` Drill Size = (Thread Size * 0.9) - 0.15mm ``` For instance, for an M6 thread, the tapping drill size would be: ``` Drill Size = (6 * 0.9) - 0.15mm = 4.85mm ```

a table with measurements for the top drill size chart
a table with measurements for the top drill size chart
the oil and taping chart
the oil and taping chart
Taylor Tools
Taylor Tools

Tapping drill sizes for some common metric threads are as follows: | Metric Thread Size | Tapping Drill Size (mm) | | --- | --- | | M0.5 | 1.33 | | M1.0 | 1.84 | | M2.0 | 2.73 | | M3.0 | 3.62 | | M4.0 | 4.52 | | M5.0 | 5.42 | | M6.0 | 4.85 | | M8.0 | 7.35 | | M10.0 | 9.35 | | M12.0 | 11.35 | | M14.0 | 13.35 | | M16.0 | 15.35 |

Factors Affecting Tapping Drill Selection

While the above formula serves as a good starting point, several other factors can influence the tapping drill size required. These include:

  • The material being tapped. Certain materials, like titanium or hardened steel, may require a smaller drill size due to their increased hardness and machinability.
  • The tapping direction. Countersinking or cross-tapping may necessitate a smaller drill size.
  • The number of threads. Drills may need to be resharpened after tapping a certain number of threads, so provision for this should be made when selecting the initial drill size.

the drill tap size formula is shown in three different positions
the drill tap size formula is shown in three different positions
Metric Tap Drill Sizes 2026: Complete Guide With Chart
Metric Tap Drill Sizes 2026: Complete Guide With Chart
the back side of a plastic sheet with numbers and measurements
the back side of a plastic sheet with numbers and measurements
Fraction chart, Decimal Chart, Millimeters Chart, Engineering, Designers Guide, Bolt Grades, measurements Chart, metric Tap, drill chart
Fraction chart, Decimal Chart, Millimeters Chart, Engineering, Designers Guide, Bolt Grades, measurements Chart, metric Tap, drill chart
Pinterest
Pinterest
the sae tap and drill chart
the sae tap and drill chart

Always consult your tapping tool's manufacturer guidelines to ensure the correct drill size is used.

Calculating Tapped Hole Size

Understanding how to calculate the tapped hole size is crucial, as it allows you to ensure that your component's hole size matches the thread size required. The general formula for the tapped hole diameter (D) is: ``` D = (Thread Size * 0.9) + (2 * Tapping Allowance) + (2 * Drill Size) ```

Where 'Tapping Allowance' refers to the additional material removed during the tapping process. Common tapping allowances for mild steel are:

23 Printable Tap Drill Charts [PDF] ᐅ TemplateLab
23 Printable Tap Drill Charts [PDF] ᐅ TemplateLab
Drill Tap Size Conversion Chart: Decimal, Metric, Number, Letter (Digital Download)
Drill Tap Size Conversion Chart: Decimal, Metric, Number, Letter (Digital Download)
a sign that has different types of drill sizes on it and the words tap drill sizes are
a sign that has different types of drill sizes on it and the words tap drill sizes are
  • Coarse-Pitch Threads: 0.1 - 0.2mm
  • Fine-Pitch Threads: 0.15 - 0.25mm

Tapping Allowance and Pitch Considerations

The tapping allowance accounts for the variation in material removed during the tapping process and is typically between 0.1mm and 0.25mm. For high-precision applications, such as aerospace or medical equipment, a smaller allowance may be required.

The pitch of the thread also plays a role in determining the tapping allowance. Fine-pitch threads, which have a smaller thread pitch, typically require a larger allowance due to the increased number of teeth encountered during tapping.

In your quest for precision and accuracy in your tapping and threading projects, remember that selecting the appropriate tapping drill size for metric threads is just one piece of the puzzle. Always consider the specific demands of your task, the materials involved, and the tools at your disposal.