Choosing the right drill bit size for tapping threads is a crucial step in creating high-quality threads for bolts or screws. The correct size ensures that your thread has an accurate pitch and depth, allowing for a solid and secure connection.
With the advent of metric and Imperial systems, understanding the conversion between the two is essential for selecting the appropriate drill bit size. In this guide, we'll explore the various drill sizes suitable for tapping threads in both systems, along with their corresponding thread sizes.
Imperial System Drill Sizes for Threads
In the Imperial system, drill sizes are often measured in fractions of an inch. The most common thread sizes range from 1/32" to 1/2", with corresponding drill bit sizes for tapping ranging from #000 to 1/2".
It's essential to note that the drill bit size listed for tapping threads in the Imperial system refers to the pilot hole diameter, while the actual thread size will be slightly larger. Using the wrong drill bit size can result in oversized or undersized threads, compromising the strength and durability of the connection.
Small to Medium Sizes (#000 to #6)
The #000, #00, and #0 drill bit sizes are suitable for tapping threads for small bolts or screws, such as those found in jewelry or small precision instruments. These drill sizes correspond to the following thread sizes:
- #000 - #0-80, 0.050" pitch
- #00 - #0-64, 0.0625" pitch
- #0 - #0-50, 0.078" pitch
- #1 - #1-32, 0.087" pitch
- #2 - #2-28, 0.110" pitch
- #3 - #3-16, 0.130" pitch
Medium to Large Sizes (#4 to 1/2")
For larger bolts or screws, the drill bit sizes ranging from #4 to 1/2" are commonly used. These correspond to the following thread sizes:
- #4 - 1/4"-20, 0.20" pitch
- #5 - 7/32"-18, 0.234" pitch
- #6 - 1/4"-16, 0.250" pitch
- 1/8" - 5/32"-24, 0.125" pitch
- 3/16" - 1/4"-18, 0.250" pitch
- 1/4" - 1/4"-14, 0.310" pitch
- 5/16" - 5/16"-18, 0.375" pitch
- 3/8" - 3/8"-16, 0.495" pitch
- 1/2" - 1/2"-13, 0.750" pitch
Metric System Drill Sizes for Threads
The metric system uses millimeter measurements for drill sizes. The corresponding thread sizes are also measured in millimeters and have a direct relationship with the drill bit size. This makes selecting the correct drill bit size much easier in the metric system.
When tapping threads in the metric system, use a drill bit size equal to the thread's pitch, which simplifies the process compared to the Imperial system. Keep in mind that using a larger drill bit size may result in stripped or overlapped threads, so accuracy is crucial.
Small to Medium Sizes (M0.7 to M3)
For small to medium-sized bolts or screws, the drill bit sizes ranging from M0.7 to M3 are commonly used. These correspond to the following thread sizes, where the drill bit size is equal to the thread pitch:
- M0.7 - M0.7 x 0.35, 0.35 mm pitch
- M0.9 - M0.9 x 0.45, 0.45 mm pitch
- M1.0 - M1.0 x 0.50, 0.50 mm pitch
- M1.2 - M1.2 x 0.60, 0.60 mm pitch
- M1.4 - M1.4 x 0.70, 0.70 mm pitch
- M1.6 - M1.6 x 0.80, 0.80 mm pitch
- M1.8 - M1.8 x 0.90, 0.90 mm pitch
- M2.0 - M2.0 x 1.00, 1.00 mm pitch
- M2.2 - M2.2 x 1.10, 1.10 mm pitch
- M2.4 - M2.4 x 1.20, 1.20 mm pitch
Medium to Large Sizes (M3 to M12)
For larger bolts or screws, use drill bit sizes ranging from M3 to M12. These sizes are suitable for a wide range of applications, from furniture assembly to automotive repairs. The corresponding thread sizes and pitches are as follows:
- M3 - M3 x 0.50, 0.50 mm pitch
- M4 - M4 x 0.70, 0.70 mm pitch
- M5 - M5 x 0.80, 0.80 mm pitch
- M6 - M6 x 1.00, 1.00 mm pitch
- M7 - M7 x 1.00, 1.25 mm pitch
- M8 - M8 x 1.25, 1.25 mm pitch
- M10 - M10 x 1.50, 1.50 mm pitch
- M12 - M12 x 1.75, 1.75 mm pitch
When selecting a drill bit size for tapping threads, always double-check the thread size required for your specific application. Using the wrong drill bit size can lead to damaged components, wasted materials, and potential safety hazards. With the information provided in this guide, you should now be well-equipped to choose the appropriate drill size for tapping threads in both the Imperial and metric systems.