✦Template Printable Ideas Insights

Optimal Tap Size for 3/8-16 Bolts

By

The question, "What size tap for 3/8" 16 bolt?" might seem straightforward at first, but the answer can vary depending on the specific application and the standard you're following. In this comprehensive guide, we'll delve into the intricacies of tap sizes suited for 3/8" 16 bolts, ensuring you make the right choice for your needs.

Before we dive into the specifics, let's briefly understand the metric: 3/8" 16 bolt. This means the bolt has a nominal diameter of 3/8 of an inch and 16 threads per inch. Now, let's discuss the appropriate tap sizes for this bolt size.

Syncro And Metric Standard Taps

In many applications, especially in the automotive and general hardware industries, Syncro and Metric standard taps are commonly used. So, what size tap should you use for a 3/8" 16 bolt?

two spiral bound notebooks with numbers and measurements on the pages, each containing different sections
two spiral bound notebooks with numbers and measurements on the pages, each containing different sections
3/8" Tap Drill Size (Ultimate Guide) - ToolsGaloreHQ
3/8" Tap Drill Size (Ultimate Guide) - ToolsGaloreHQ
HIGHPOINT T-Nut - 3/8" x 16 TPI - 10 Piece
HIGHPOINT T-Nut - 3/8" x 16 TPI - 10 Piece

Given the 16 threads per inch, the tap should also have 16 threads per inch to ensure a precise fit. The most common tap size for a 3/8" 16 bolt, following the Syncro standard, is #10-32 or M5x0.8.

#10-32 Tap (Syncro)

The #10-32 tap is a popular choice for 3/8" 16 bolts as it follows the Syncro standard. Its dimensional details are as follows:

What Size Drill Bit for 1/4 20 Tap - ToolsGaloreHQ
What Size Drill Bit for 1/4 20 Tap - ToolsGaloreHQ
Vintage Set of 3 No: LALL td England 3/4 BSW x 10 Taps Good Condition
Vintage Set of 3 No: LALL td England 3/4 BSW x 10 Taps Good Condition
10 Pack of Hanger Bolt for Tap Ferrules
10 Pack of Hanger Bolt for Tap Ferrules
  • Major Diameter: 0.190"
  • Pitch Diameter: 0.1695" (16 threads per inch)
  • Minor Diameter: 0.1405"

M5x0.8 Tap (Metric)

If you're following the Metric standard, the M5x0.8 tap is suitable for a 3/8" 16 bolt. Here are its dimensions:

  • Major Diameter: 5mm
  • Pitch: 0.8mm (16 threads per inch)
  • Minor Diameter: 3.95mm

UNF And UNC Taps

In some industries, particularly in the United States, UNF (Unified Fine) and UNC (Unified Coarse) taps are preferred. Let's explore the suitable tap sizes for a 3/8" 16 bolt under these standards.

For 3/8" bolts, UNF-2A and UNC-2A taps are typically used, which correspond to a 16 threads per inch pitch.

Tap Extractor - Tap Extractor, Screw Extractor, Steel Broken Head Tap Remover, Screw, Stripped Extractor, Tap Set (Size: 9 Pieces) MUMU
Tap Extractor - Tap Extractor, Screw Extractor, Steel Broken Head Tap Remover, Screw, Stripped Extractor, Tap Set (Size: 9 Pieces) MUMU
an assortment of screws, nuts and washers
an assortment of screws, nuts and washers
Stainless Steel Coarse Full Thread Tap Bolts Kit - 3/8" Diameter
Stainless Steel Coarse Full Thread Tap Bolts Kit - 3/8" Diameter
various types of screws and nuts are shown in this image with the caption below
various types of screws and nuts are shown in this image with the caption below

UNF-2A Tap

The UNF-2A tap is designed for 3/8" bolts with 16 threads per inch. Its dimensions are:

  • Major Diameter: 0.190" (nominal)
  • Pitch Diameter: 0.1695" (16 threads per inch)
  • Minor Diameter: 0.1317"

UNC-2A Tap

The UNC-2A tap is another option for a 3/8" 16 bolt, with the following dimensions:

  • Major Diameter: 0.1875" (nominal)
  • Pitch Diameter: 0.1695" (16 threads per inch)
  • Minor Diameter: 0.1278"

Now that we've explored various tap sizes suitable for a 3/8" 16 bolt, you should be well-equipped to make an informed decision based on the standard prevailing in your industry or application.