✦Template Printable Ideas Insights

5/16-18 Tap Bit Size: Which One Fits Perfectly?

By

When it comes to tapping a 5/16" or 5/18" hole, selecting the right bit size is crucial to ensure a proper fit and prevent damage to the material. The bit size should be slightly smaller than the tap's minor diameter to create a thread that fits perfectly. For a 5/16" or 5/18" tap, you'll typically need a bit size that falls within a specific range. Let's dive into the intricacies of choosing the right bit size for these taps.

First, let's understand the differences between the two tap sizes. A 5/16" tap has a major diameter of 5/16" and a minor diameter of 10/32". On the other hand, a 5/18" tap has a major diameter of 5/18" and a minor diameter of 11/32". While both taps share the same major diameter, the minor diameters differ slightly, influencing the bit size selection.

Bit Sizes for 5/16" Tap

The bit size for a 5/16" tap should be slightly smaller than its minor diameter (10/32" or 0.3125") to create a thread that fits snugly. A common practice is to use a bit size that is around 75% to 80% of the minor diameter. This allows for some clearance and account for the tap's chamfer.

the table size chart for drill sizes is shown in red and black, with an arrow pointing
the table size chart for drill sizes is shown in red and black, with an arrow pointing
Drill Tap Size Conversion Chart: Decimal, Metric, Number, Letter (Digital Download)
Drill Tap Size Conversion Chart: Decimal, Metric, Number, Letter (Digital Download)
a table with numbers and times for different types of items in the form of letters
a table with numbers and times for different types of items in the form of letters

A bit size of 7/32" (0.21875") or 1/8" (0.125") typically works well for a 5/16" tap. These bit sizes ensure a proper fit and allow the tap to cut the thread without excessive pressure or damage to the material. Here's a breakdown of these bit sizes:

Bit Size: 7/32" (0.21875")

Using a 7/32" bit for a 5/16" tap provides a good balance between fit and ease of tapping. This bit size is around 68% of the 5/16" tap's minor diameter and creates a thread that is tight but remained accessible for assembly and disassembly.

What Size Drill Bit for a 6mm Tap (Ultimate Guide) - ToolsGaloreHQ
What Size Drill Bit for a 6mm Tap (Ultimate Guide) - ToolsGaloreHQ
What Size Drill Bit for 1/4 20 Tap - ToolsGaloreHQ
What Size Drill Bit for 1/4 20 Tap - ToolsGaloreHQ
23 Printable Tap Drill Charts [PDF] ᐅ TemplateLab
23 Printable Tap Drill Charts [PDF] ᐅ TemplateLab

This bit size is suitable for various materials, including steel, aluminum, brass, and plastic. It's an excellent choice for applications where a medium to tight fit is required, such as in machinery, plumbing, or electrical connections.

Bit Size: 1/8" (0.125")

A 1/8" bit provides some additional clearance for tapping, making it easier to cut the thread, especially in harder materials like stainless steel or cast iron. This bit size is around 40% of the 5/16" tap's minor diameter and results in a thread with a more gradual slope.

While this bit size offers easier tapping, it might lead to a slightly looser fit compared to using a 7/32" bit. It's a good choice for applications where accessibility is more critical than the tightness of the fit, such as in HVAC systems, agriculture equipment, or furniture assembly.

Tap Drill Charts Examples
Tap Drill Charts Examples
the table is full of data for each type of driller and drilling machine
the table is full of data for each type of driller and drilling machine
3/8" Tap Drill Size (Ultimate Guide) - ToolsGaloreHQ
3/8" Tap Drill Size (Ultimate Guide) - ToolsGaloreHQ
a table with measurements for the top drill size chart
a table with measurements for the top drill size chart
23 Printable Tap Drill Charts [PDF] ᐅ TemplateLab
23 Printable Tap Drill Charts [PDF] ᐅ TemplateLab
Machinist Tap Drill Depth Chart, Metric Tap Drill Sizes, Inch Series Tap Drill Chart, Drill Size Chart For Taps, Metric Tap Drill Bit Chart, Standard Tap Drill Size Chart, Tap Drill Size Chart, Decimal Tap Drill Size Chart, Printable Tap Drill Size Chart
Machinist Tap Drill Depth Chart, Metric Tap Drill Sizes, Inch Series Tap Drill Chart, Drill Size Chart For Taps, Metric Tap Drill Bit Chart, Standard Tap Drill Size Chart, Tap Drill Size Chart, Decimal Tap Drill Size Chart, Printable Tap Drill Size Chart

Bit Sizes for 5/18" Tap

For a 5/18" tap, you'll want to select a bit size that is slightly smaller than its minor diameter (11/32" or 0.34375"). Following the same logic as with the 5/16" tap, a common practice is to use a bit size that is around 75% to 80% of the minor diameter. This results in bit sizes of 8/32" (0.25") or 3/16" (0.1875") for a 5/18" tap.

Here's a detailed look at these bit sizes:

Bit Size: 8/32" (0.25")

An 8/32" bit offers a good balance between fit and ease of tapping for a 5/18" tap. This bit size is around 73% of the 5/18" tap's minor diameter and results in a thread that provides a medium to tight fit.

Tap Drill Charts
Tap Drill Charts
Tap Drill Size & Decimal Equivalent Chart (Digital Download)
Tap Drill Size & Decimal Equivalent Chart (Digital Download)
the table shows different types of drill sizes and decimal equivants
the table shows different types of drill sizes and decimal equivants

This bit size is suitable for various materials, including steel, aluminum, brass, and plastics. It works well for applications where a moderate fit is required, such as in automotive, aerospace, or general manufacturing.

Bit Size: 3/16" (0.1875")

A 3/16" bit provides some additional clearance for tapping, making it easier to cut the thread in harder materials. This bit size is around 55% of the 5/18" tap's minor diameter and creates a thread with a more gradual slope.

While this bit size offers easier tapping, it might lead to a slightly looser fit compared to using an 8/32" bit. It's an excellent choice for applications where accessibility is more critical, such as in construction, plumbing, or furniture assembly.

In conclusion, selecting the right bit size for a 5/16" or 5/18" tap depends on the material and the desired fit. For both tap sizes, bit sizes of 7/32" or 1/8" and 8/32" or 3/16" respectively, are common choices that provide a good balance between fit and ease of tapping. Always consider the application's requirements and the material's characteristics when choosing the appropriate bit size.