When it comes to tapping and creating clearance holes, having a metric tap drill and clearance hole chart at your disposal is paramount. It guides you in selecting the correct drill bit and tap for your material, ensuring your work is precise and long-lasting. This guide will delve into understanding tap drill sizes, clearance hole diameters, and how to use them effectively.
Before diving into the chart, let's first understand the basics. **Tap Drill Sizes** are measured in millimeters and are the initial hole's diameter you drill to accommodate the tap. **Clearance Hole Diameters** are the final cut once the thread has been tapped, providing clearance for the bolt or screw head to sit flush.
Tap Drill Sizes and Clearance Holes
Tap drill sizes and clearance holes are interdependent. The chart below illustrates the correlation between tap drill sizes, clearance hole diameters, and common bolt/screw sizes in metric units.
Tap Drill and Clearance Hole Chart: Metric
| Tap Drill Size (mm) | Clearance Hole Diameter (mm) | Bolt/Screw Diameter (mm) - ISO Property Class |
|---|---|---|
| 2.0 | 4.5 | 3 - M3 |
| 2.6 | 5.5 | 4 - M4 |
| 3.2 | 6.5 | 5 - M5 |
| 3.9 | 8.0 | 6 - M6 |
| 4.5 | 9.5 | 8 - M8 |
| 5.0 | 11.0 | 10 - M10 |
| 6.0 | 14.0 | 12 - M12 |
For instance, if you need a M6 bolt, consult the chart. It suggests a 3.9mm tap drill size and a 8.0mm clearance hole diameter. Always ensure your chosen tap drill size accommodates your desired bolt/screw diameter and ISO property class.
Tips for Using the Tap Drill and Clearance Hole Chart
When using the chart, consider the following:
- Choose tap drill sizes based on the desired bolt/screw diameter and ISO class.
- Always drill the clearance hole slightly larger than the bolt/screw head to allow for easy insertion and retraction.
- Maintain clean, sharp tools for smoother, more accurate drilling and tapping.
Creating Tap Holes: Step-by-Step
Now that you understand the tap drill sizes and clearance holes, let's walk through the process of creating a tapped hole.
Step 1: Drill the Tap Hole
Using the appropriate tap drill size from your chart, drill a hole into your material. Ensure the drill bit is sharp and well-supported to prevent slipping or breakage.
Step 2: Clean the Hole
Remove any debris or swarf from the drilled hole to ensure smooth tapping. You can use an air compressor or a simple brush to clean it.
Step 3: Tap the Hole
Select a tap that matches the bolt/screw size you're using. Cut the tap into your previously drilled hole, turning clockwise. Once it's fully tapped, back it out counterclockwise to remove it.
Accurately using a tap drill and clearance hole chart in your workshop will improve your productivity and the quality of your work. It's a critical reference tool for anyone working with tapped holes and fasteners. So, keep this chart handy, and always double-check before you drill or tap.