When it comes to DIY projects or home improvement tasks, having the right tools and knowing their proper sizes is crucial. Taps and drills are versatile tools that every homeowner should have. To ensure you're using the correct size for your applications, here's a comprehensive tap and drill size chart you can print out and keep handy.
Before diving into the chart, let's briefly discuss the importance of knowing tap and drill sizes. Taps, used for creating threads in materials, must match the size of the drill bit used to create the hole. Using an incorrect size can lead to damaged tools, ruined materials, or even injury. Similarly, a drill bit that's too small or large for the desired hole can result in improper fit or weakened material.
Tap Sizes
The most common tap sizes are fractional, metric, and SAE (Society of Automotive Engineers). The size of a tap is usually indicated by its major diameter and pitch (the distance between threads).
Here's a simplified tap size chart for your reference:
| Tap Type | Size |
|---|---|
| Fractional | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" |
| Metric | M2, M2.5, M3, M4, M5, M6, M8, M10, M12 |
| SAE | 0, 1, 2, 3, 5/16, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1 |
Fractional Taps
Fractional taps are commonly used in woodworking and light metalworking. The most common sizes are 1/4", 3/8", and 1/2".
For example, to create a 1/2" hole in a material, you would use a 1/2" drill bit, followed by a 1/2"-13 or 1/2"-18 tap (depending on the desired thread count per inch).
Metric Taps
Metric taps are widely used in engineering and manufacturing. Common sizes include M4, M5, M6, and M8.
For instance, to create an M6 thread, you would first drill an M6 hole (usually 5.5mm) and then use an M6 tap.
Drill Bit Sizes
Drill bit sizes are typically measured in millimeters or fractions of an inch. The size you'll need depends on the material and the desired hole diameter.
Here's a drills size chart for common applications:
| Material | Drill Bit Size |
|---|---|
| Softwood (Pine, etc.) | 8-32mm (1/4"-1-1/4") |
| Hardwood | 6-25mm (1/4"-1") |
| Masonry (Brick, Concrete) | 6-25mm (1/4"-1") |
| Metal (Aluminum, Steel) | 3-12mm (1/8"-1/2") |
Drilling Softwood and Hardwood
For softwoods, like pine, you can use larger drill bits, whereas for hardwoods, it's better to start with a smaller bit and gradually increase the size.
For example, to create a 10mm hole in a softwood, you could use a 10mm drill bit directly, but for hardwood, you might start with a 6mm bit and then increase to 8mm and finally 10mm.
Drilling Masonry and Metal
When drilling masonry or metal, it's crucial to use the correct drill bit size to avoid breaking the material or damaging your drill.
For instance, to create a 10mm hole in concrete, use a 10mm concrete drill bit. For aluminum, a 6mm or 8mm drill bit should suffice, depending on the depth and thickness of the material.
Remember, always wear safety gear when using power tools, and if unsure about the correct drill bit size, consult a professional or the material's manufacturer guidelines.