A Starrett drill and tap size chart is an essential reference tool for machinists, engineers, and DIY enthusiasts alike, serving as a quick and accurate guide to drilling and tapping holes to the correct depths and thread pitches. This chart, based on Starrett's renowned standards, ensures precision and consistency in manufacturing, repairs, and hobby projects.
Accurately drilling and tapping holes is a fundamental aspect of working with metals and other materials. Understanding the various drill and tap sizes, along with their corresponding hole diameters and thread pitches, is crucial for creating threads that both fit and perform perfectly.
The Starrett Numbering System
The Starrett numbering system is a simplified approach to specifying various aspects of a drill or tap, including its size, point angle, and flutes. This universality makes it a widely accepted industry standard, making the Starrett drill and tap size chart an invaluable resource.
Each Starrett number corresponds to a specific drill or tap size, with some numbers representing multiple sizes. For instance, a #4 drill is 1/8" in diameter, while a #5 tap can refer to either 1/4"-13 or 1/4"-8 UNC threads, depending on the context.
Drill Sizes and Corresponding Holes
The Starrett numbering system for drills follows a straightforward pattern, with each number equating to a specific hole diameter. For example, a #4 drill creates a 1/8" hole, while a #16 drill creates a 1/2" hole.
The chart also indicates the corresponding metric diameter for each number, handy for those working in environments that prefer or require metric measurements. For instance, a #12 drill, which creates a 3/8" hole, also creates a 10mm hole.
Tap Sizes and Corresponding Threads
When it comes to taps, Starrett numbers reflect the major diameter of the thread, which is essentially the outer diameter of the bolt or screw that would fit into the tapped hole. For example, a #5-40 tap creates a hole with a 1/4" major diameter and a thread pitch of 40 threads per inch (TPI).
The thread pitch is the distance between adjacent threads, measured in threads per inch. Starrett numbers for taps surprisingly do not include the thread pitch. Instead, the pitch is specified separately when using the tap. For instance, a #5 tap can create either a 1/4"-13 or a 1/4"-8 UNC thread, depending on the pitch specified.
USING THE STARRETT DRILL AND TAP SIZE CHART
To use the Starrett drill and tap size chart effectively, follow these steps:
1. Identify the required hole diameter or thread major diameter, based on the bolt or screw's specifications.
2. Consult the Starrett drill and tap size chart to find the corresponding drill or tap size for your desired hole diameter or thread.
3. Determine the appropriate drill point angle, flutes, and tap point type based on the material you will be drilling or tapping into.
4. Drill the hole to the correct depth using the appropriate drill bit, then use the corresponding tap to cut the desired thread into the drilled hole.
Mastering the Starrett drill and tap size chart empowers you to tackle a wide range of projects with precision and confidence. From manufacturing processes to home improvement tasks, accurate drilling and tapping form the foundation of many successful outcomes.