Measuring tools and hardware have their own unique measurement systems, which can sometimes cause confusion when moving from one to another. This is the case when trying to understand the relationship between Starrett decimal equivalents and tap drill sizes. To provide you with a clear understanding of these measurement systems and how to convert one to the other, we'll first dive into each system individually, then discuss the process of conversion.
Before delving into the specifics, let's briefly touch on what Starrett decimal equivalents and tap drill sizes mean. Starrett decimal equivalents are a measurement system developed by the Starrett company, a leading manufacturer of measuring tools. It's a decimal-based system that aims to simplify fractional measurements. On the other hand, tap drill sizes refer to the standardized sizing system used for drills that cut taps.
Understanding Starrett Decimal Equivalents
Starrett decimal equivalents are a fractional to decimal conversion system applicable to various units of measurement. It's primarily used in metrology and dimensional metrology. It offers a convenient alternative to traditional fractional measurements, making it easier to work with smaller measurements and decimals.
At the heart of Starrett decimal equivalents are the two main types: Starrett Original (SO) and Standard (SI). The difference between the two lies in their nominal size and the decimal factors used. SO's nominal size is 1/16 inch, and it's the smaller of the two systems. SI, on the other hand, has a nominal size of 1/8 inch.
Starrett Original (SO)
In SO, measurements are divided into 16 parts. These parts are then further divided into 25, 100, or 400 equal parts, depending on the decimal factor used. You can represent SO measurements in an 'F#' format, where '#' is the decimal factor.
For example, SO 125.0 represents 125 * (1/16) * (1/100) inches, which equals 0.125 inches or 1/8 inch.
Starrett Standard (SI)
SI uses a nominal size of 1/8 inch, and measurements are divided into 8 parts. These parts are then further divided into 25 or 100 equal parts, depending on the decimal factor used. SI measurements are represented in an 'E#' format.
For instance, SI E100.0 translates to 100 * (1/8) * (1/100) inches, equating to 0.125 inches or 1/8 inch.
Understanding Tap Drill Sizes
Tap drill sizes refer to the diameter of the hole that needs to be made for a specific tap (threads cutter used to create internal threads). Tap drill sizes are measured in fractions of an inch, with the most common series being No. 0-11. These taps are threaded in a specific way, creating internal threads of a specific diameter, which is why it's crucial to use the correct tap drill size for your application.
The No. 0-11 series of taps represent ascending drill sizes, meaning the larger the number, the larger the drill size. For example, No. 0 is the smallest, and No. 11 is the largest in this series.
Tap Drill Sizes Chart
A quick glance at the tap drill sizes chart can help understand the sizes at a glance. Here's a simplified chart:
| Tap Drill Size (No.) | Increment (in inches) |
|---|---|
| 0 | 0.067 - 0.074 |
| 1 | 0.083 - 0.092 |
| 2 | 0.100 - 0.108 |
| 3 | 0.116 - 0.126 |
Understanding these increments is crucial as it allows you to choose the correct tap drill size for your application. You can select a larger size for left-hand threads or a smaller size for right-hand threads.
Converting Between Starrett Decimal Equivalents and Tap Drill Sizes
While Starrett decimal equivalents and tap drill sizes serve different purposes, understanding how to convert measurements between the two systems is crucial. Here's a quick formula to convert from Starrett (SO) to tap drill sizes:
Convert Starrett measurement to inches, then multiply by (0.085/0.125). Add the result to the fractional size of the tap that's one size smaller. For example, to convert SO125 to a tap drill size, do the following:
- Convert SO125 to inches: 0.125 inches
- Multiply by (0.085 / 0.125): 0.68
- Add the result to the fractional size of the tap that's one size smaller: 0.68 + 0.09 (from No. 1) = 0.77
To convert tap drill sizes to Starrett (SO), follow the reverse calculation. Divide the tap drill size by 0.085, then multiply by 1.25 and round to the nearest fifth. For instance, to convert No. 3 to SO, do the following:
- Divide No. 3 (0.116 - 0.126 inches) by 0.085: 1.369 - 1.482
- Multiply by 1.25: 1.712 - 1.852
- Round to the nearest fifth and you'll get SO 168 or SO 170.
The conversion between these two systems, while requiring some calculations, becomes a straightforward process once you understand the mechanisms behind each system. With a little practice, you should be able to convert from Starrett decimal equivalents to tap drill sizes, and vice versa, with ease.