Printing McCall's PDF patterns might seem daunting at first, but with the right steps and a little know-how, it can be a breeze. Here's a simple guide to help you print and assemble your patterns like a pro.
Before we dive in, ensure you have the necessary equipment: a computer or tablet with stable internet, a PDF reader (we recommend Adobe Acrobat Reader for best results), and a printer with abundant ink and paper. You'll also need a ruler, scissors, and a good straight edge for cutting. Now, let's get started!
Preparing Your PDF Pattern
First, download your McCall's pattern to your computer. Double-click the downloaded .zip file to extract the PDF pattern. Open the PDF using your preferred reader; for this guide, we'll use Adobe Acrobat Reader.
Before printing, check if your PDF is tiled or not. Tiled patterns are split into smaller parts for printing. Adobe Reader indicate this with a 'Tile' icon in the top-right corner of the pattern piece. If your pattern is tiled, you'll need to assemble the pages before printing.
Assembling Tiled Pattern Pieces
If your pattern is tiled, click on the 'Tile' icon at the top of the page to view the entire piece. To assemble, follow these steps:
- Print page 1 of the assembly guide. This usually shows how all the tiles fit together.
- Using a ruler and a pencil, trace the lines on the printed page onto the back of each corresponding tiled page.
- Carefully cut along the traced lines.
- Assemble the tiled pieces, using the printed assembly guide as a reference. Tape or glue them together.
Checking and Adjusting Pattern Scale
Before printing, ensure your pattern pieces will be the correct size. Click on the 'Page Display' icon (it looks like two pages stacked) at the top of your PDF. In the dropdown, select 'Actual Size' to check if your pattern pieces fit within the printer's paper size.
If they don't, you might need to reduce the pattern scale. To do this, click on the '%' icon. experimentally adjust the percentage until the pattern pieces fit. Then re-check the size by printing a test square - McCall's patterns often include one. If the test square is the correct size (usually 1"), your pattern scale is correct.
Printing Your Pattern
Once your pattern is assembled (if it was tiled) and you've confirmed the scale, you're ready to print! Ensure your printer settings are correct:
- Select 'Actual Size' or '100%' as the scale.
- Choose ' Portrait' or 'Landscape' orientation depending on your pattern.
- Select 'Borderless' or 'None' for the margins to ensure no important information is cut off.
Printing Tips
When printing, use a good quality paper suitable for your printer. Normal, 80gsm paper works well for most printers. Avoid using cardstock or heavyweight paper, as it may not feed through your printer correctly.
For better accuracy, print one piece at a time. Check each piece as you print to ensure they're the correct size. If they're not, double-check your printer settings and try again. Once you're happy with the sizing, print all the pieces you need.
Transferring the Pattern
Once you've printed all the pattern pieces, it's time to transfer them onto your chosen fabric. You can do this using several methods:
Option one: Trace your pattern directly onto your fabric using a tracing wheel and chalk or carbon paper. This method is accurate but can be time-consuming.
Option two: Add seam allowances to your pattern pieces and trace onto newspaper or thin paper. Pin the traced pieces onto your fabric and cut around them. This method is faster but uses more paper.
Avoid cutting directly on your printed pattern pieces. The ink could transfer onto your fabric, causing staining and ruin your project.
Finally, put your scissors and fabric away, and admire your beautifully printed and transferred McCall's pattern pieces. You're now one step closer to creating a stunning new garment!