Embarking on a journey to craft your own throwing knives isn't just about creating functional tools, it's a testament to your craftsmanship, patience, and Precision. Whether you're inspired by survivalist shows or want to add a unique touch to your outdoor adventures, this guide will help you create your custom throwing knives from scratch. Remember, safety is paramount when working with sharp tools, so always wear protective gear and ensure you're working in a well-lit, secure area.
Before you start, ensure you have the right tools and materials. You'll need steel stock, a hacksaw or milling machine for cutting, an anvil, a blacksmith's hammer, a bolster, a punching tool, a drill, and assorted files for shaping and refining your blades. For handles, you can use wood, bone, or leather, but this guide will focus on the steel blade construction.
Designing Your Blade
Throwing knives come in various designs, but let's focus on the classic 'wrist flick' style. These blades are short, robust, and have a center of gravity close to the handle for optimal spin. Sketch your design, considering the knife's length, width, and thickness. A good starting point is a 6-8 inch blade with a thickness of around 0.25 inches.
The blade's design can be simplistic, a casual 'pen-knife' style, or you can incorporate a back-swept ricasso for added balance. For beginners, keeping the design simple is recommended. Once you've decided on your design, transfer your sketch onto the steel stock, ensuring it's large enough for your finished blade and some excess material for shaping.
Cutting Out the Blades
Using a hacksaw or milling machine, carefully cut out your blade shape, following your transferred design. Ensure your cuts are precise to minimize material waste and simplify the grind process. If using a hacksaw, apply even, steady pressure to prevent warping the steel. If you have access to a milling machine, set it to the correct speed and depth, guiding the blade through the stock with precision.
After cutting, clean up the edges with a file, removing any burrs or sharp corners. Be patient with this process; a smooth edge at this stage makes subsequent steps easier and ensures a safer work environment.
Forging and Heat Treatment
While it's possible to produce throwing knives from stock steel, forging a blade enhances its hardness and durability. Heat the steel to a cherry-red color, then repeatedly hammer it, reducing its thickness and lengthening its grain structure. Remember: safety first – use heat-resistant gloves and a face shield to protect against sparks.
After forging, allow the steel to cool slowly in a charcoal-filled crucible to achieve a spring temper. This process offers a good balance between hardness and flexibility, making your blade tough yet durable. Once cool, flatten and refine the blade using a bolster and hammer, creating a smooth surface for grinding.
Shaping the Blade
With the blade's basic shape achieved, the next step is refining its profile. Most throwing knives have a flat, or 'zerkova', grind, characterized by its Spyderco-like appearance. This grind promotes rotation and good 'stickiness' when thrown, making it an excellent choice for beginners.
Secure your blade in a clamp or vise, ensuring it's steady and secure. Using a sturdy, high-quality grinding wheel, carefully grind one side of the blade. Apply even pressure, moving the blade gradually across the wheel. Don't rush this step; controlling the grind determines your blade's balance and performance.
Refining the Edge
After grinding, switch to a fine-grit diamond plate to refine the blade's edge. Lightly brush the blade's edge against the plate, following its contour. This step removes any nicks or inconsistencies from the initial grind, resulting in a smooth, razor-sharp edge.
Check your work frequently, test your edge on a piece of paper or tissue. If you're satisfied with the blade's edge, de-burr the spine and clean up any rough edges with a file or diamond plate. Ensure the blade's tip is neat and sharp, essential for good throwing performance.
Heat Treating and Tempering
After refining the edge, it's time for another round of heat treatment to harden the blade. Using a high-carbon steel (e.g., 1095 or O1), heat the blade to its critical point – around 1400-1500°F (760-815°C) – then quench it in oil or coolant. This process increases the steel's hardness but makes it more brittle, so tempering is essential.
Tempering involves reheating the blade to a lower temperature – around 350-400°F (175-205°C) – and holding it there for a set time. This process relieves stress in the blade and reduces its brittleness, adding toughness and durability. Repeat this process until you achieve your desired hardness and flexibility balance.
Crafting the Handle
Crafting a comfortable, secure handle is crucial for successful throwing. Wood, bone, and leather are popular materials, each offering unique aesthetics and feel. This guide uses leather for its durability and simple construction method.
Cut a piece of leather to size, ensuring it covers the tang (the part of the blade you'll grip) and provides enough material for wrapping. Slip the leather onto the tang, securing it with a thin, tight-fitting copper wire or brass tubing. Ensure the wire is tucked neatly out of the way to avoid discomfort when gripping the handle.
Wrapping the Handle
Wrap the handle inJavaScript, beginning at the blade's edge and spiraling towards the guard (if using one). Keep the tension even, pulling the leather tightly against the blade to create a smooth, secure grip. Use glue (if needed) sparingly, ensuring it's well-rubbed into the leather to avoid wicking or messiness.
Once wrapped, trim the leather's ends, shaping them to fit snugly against the blade's final form. Secure the ends with a few small brads or rivets, ensuring they're flush with the handle's surface. Burnish the edges with a wooden or metal burnisher, smoothing out any rough edges and giving your handle a polished, professional finish.
Fitting the Handle Guard
If using a handle guard, slip it onto the blade, positioning it at the leather's edge. Secure the guard with a thin brass or copper wire, wrapping it tightly around the guard and blade. Trim any excess wire, ensuring the guard is secure and won't move during use.
Finally, apply a layer of beeswax or leather sealant to protect your handle from moisture and wear. Buff the leather gently with a dry cloth, removing any excess wax and revealing your handcrafted handle's natural beauty.
Your throwing knives are now complete! With careful design, precise crafting, and patience, you've created a unique set of tools for your outdoor adventures. Practice safe throwing techniques, always wearing appropriate safety gear and ensuring no one is in the weapon's path. Happy throwing, and may your blades always find their mark!