The intoxicating blend of simplicity and precision that knife throwing offers entices thousands of enthusiasts to pick up this unique skill. A key component of practicing knife throwing is having an engaging and sturdy target, which brings us to discuss how to make a knife throwing target out of wood.
This DIY project not only saves you money but also allows you to customize your target to suit your preferences. In this comprehensive guide, we will walk you through the steps to create a high-quality wooden knife throwing target. Let's dive into the process.
Materials and Tools Needed
Before we begin, you'll need to gather the following materials and tools:
- Cordless drill
- Assortment of drill bits ( 1/2", 1", 1-1/4", 2" and 8mm)
- Circular saw or handsaw
- Tape measure
- Pencil
- Sandpaper (80-grit, 120-grit)
- Pocket knife or chisel for sharpening
- Outdoor-rated wood glue
- 8" x 4' cedar fence pickets (or another hardwood)
Once you have your materials ready, let's move on to the construction process.
Building the Wooden Knife Throwing Target
Preparing the Boards
Start by preparing the cedar fence pickets. Since cedar is naturally rot-resistant, it's an excellent choice for an outdoor target.
Using a circular saw or handsaw, cut the pickets into three pieces per board, each measuring approximately 24", 12", and 4". Be sure to wear safety gear while operating power tools. After cutting, sand the edges and faces of each piece to remove any rough or split areas.
Drilling the Knife Targets
The secret to an effective throwing target lies in its design. Drilling various-sized holes creates multiple targets for different types of throws. Start by marking the center of each board. Next, mark a 2" in diameter circle around the center point, followed by a smaller 1/2" circle. This will be your bullseye target.
Using a 2" drill bit, carefully bore through the center of the board, creating your bullseye. Next, with an 8mm bit, drill through the center of the smaller circle to create a secondary bullseye within your first one. Repeat this process on all three board pieces.
Assembling the Knife Throwing Target
Constructing the Frame
Lay the 24" board face down on a flat surface. Apply wood glue along the edges of the 12" board and attach it perpendicular to the 24" board, creating an L shape. Secure the pieces together with clamps and allow the glue to dry.
Once the glue has dried, apply wood glue to the edges of the 4" board and attach it perpendicular to the other two boards, creating a box-like frame. Allow the glue to dry. To ensure stability, you can reinforce the corners with screws if desired.
Mounting the Target Faces
Measure and mark the center of each throwing target (24", 12", and 4") and attach them to the frame using woodscrews. Ensure that the bullseye is facing the same direction on each target. This will provide you with different throwing angles and challenges.
Step back and admire your newly constructed wooden knife throwing target! As a final touch, use a pocket knife or chisel to create a small groove around the perimeter of each bullseye to catch thrown knives and make them easier to remove.
Now that you've mastered the art of creating a wooden knife throwing target, it's time to hone your throwing skills! Safety should always be your top priority, so make sure to follow proper knife throwing techniques and always wear appropriate safety gear when practicing. Happy throwing!