For those seeking a comfortable, discrete, and affordable chest binding solution, creating a chest binder from scratch can be an excellent and empowering DIY project. This guide walks you through the process, ensuring you have all the necessary information and guidelines for a safe and secure final product.
Before we dive into the steps, it's crucial to understand that while this method is suitable for many, it may not be appropriate for everyone. Those with specific medical conditions or needs may require professionally designed binders. Always consult with a healthcare provider if you have any doubts or concerns.
Materials and Preparation
To begin, gather your materials. You'll need an old, non-stretchy t-shirt (preferably cotton), a sewing machine or needle and thread, safety pins, scissors, and a measuring tape. You'll also need another t-shirt, velvet, or another soft, non-stretchy fabric to create your binding material.
Once you have your materials, prepare your workspace. This will involve washing and drying your materials to ensure there's no shrinkage, and laying out your scissors, pins, and sewing materials for easy access.
Measuring and Cutting
Start by measuring your Chest Overbust (COB): measure around the fullest part of your chest, ensuring the tape is parallel to the ground. Next, measure your Waist to Underbust (WU): measure around your body where you'd like your binder to sit, usually just below your breasts. Finally, measure your Underbust (UB): measure around the smallest part of your chest, just below where your breasts are.
Cut your non-stretchy fabric into two panels. The width should be the difference between your COB and UB (COB - UB), and the height should be the difference between your WU and COB (WU - COB). You'll also need to cut two smaller panels for the cups, measuring the fullness of your breasts and the height from your neckline to where you'd like the binder to end.
Sewing the Panels
Begin by sewing the cups to the larger panels. These should be positioned under your arm and chest, with the top edge of the cup aligned with the top edge of the large panel. Leave the bottom of the cups open for now. Once this is done, sew the sides of the large panels together, leaving the top and bottom open.
Next, try on the binder and adjust the fit. You can add darts for a better fit or take the sides in if it's too wide. Once you're happy with the fit, sew up the bottom of the binder. If you'd like, you can add an elastic band for extra support, sewing it into the seam as you sew up the bottom.
Securing Your Binder
Once your binder is sewn, it's time to add closures. This will involve sewing buttons or velcro onto the inside of the binder, and onto the outside, just below where you'll want the binder to overlap. This will allow you to adjust how tight the binder is and will make it easier to put on and take off.
Before sewing on the closures, try on your binder once more to ensure the placement is correct. Then, sew on your closures, and test them out. You should be able to fasten and unfasten the binder with ease, and it should feel secure and comfortable when worn.
Finishing Touches
If you've chosen to use elastic, you can now stitch it into place at the top and bottom of your binder. This will help keep the binder from riding up or down and will give it a more finished look. You can also hem the top and bottom of your binder for a cleaner appearance, but this step is optional.
Finally, try on your binder. It should feel secure and comfortable, and it should flatten your chest discreetly. Make any necessary adjustments, and you're ready to wear your new chest binder!
Remember, it's always important to listen to your body. If your binder feels uncomfortable or restrictive, loosen it or take it off immediately. With this guide, you're now equipped to create a safe, supportive, and flattering chest binder. Happy sewing!