Ever found yourself in need of a specific size envelope for a greeting card or a small parcel, but couldn't find a 5x7 in stores? Don't worry, you can make one at home. This guide will walk you through the process, enhancing your DIY skills and perhaps inspiring you to create other custom stationery pieces.
Before you start, gather your materials: letter-sized paper, a printer, scissors or a paper cutter, a ruler, and a pen. Following these steps will help you make a 5x7 envelope that's perfect for your needs.
Understanding Envelope Dimensions
The dimensions of an envelope refer to the flap size, not the internal pocket size. A 5x7 envelope's flap is 5 inches wide and 7 inches high. Knowing this will help you calculate the dimensions of your custom envelope.
For this project, you'll be using a letter-sized paper (8.5x11 inches) to ensure ample space for the flap and sealed pocket.
Calculate Needed Dimensions
First, determine the height of your envelope. Since you want a 7-inch flap, start by measuring and marking at 7 inches from the top of the paper.
For the width, you'll need more than just 5 inches for the flap and sealed pocket. The envelope's height minus the flap height (7 inches) will give you the depth of the pocket. In this case, that's 1.5 inches (8.5 - 7 = 1.5). So, you'll need a total of 5 + 1.5 = 6.5 inches for the width of your envelope.
Mark Your Measurements
Using a ruler and pen, mark the 7-inch line at the top and the 6.5-inch line along one of the paper's longer sides. These will serve as your envelope's height and bottom width.
Next, measure and mark another line 0.5 inches in from the top line. This will be the top of your envelope's flap. Also, draw a line 1.5 inches from the bottom line, which will be the bottom edge of the sealed pocket.
Create the Envelope Shape
Now that your markings are in place, you can start cutting and folding your paper into an envelope shape.
Using your scissors or paper cutter, trim the edges following your lines. You should now have a shape that resembles a house or roof, with a 7-inch top, a 6.5-inch bottom, and a 1-inch difference between the top and bottom edges.
Fold the Flap
With the envelope blank resting flat with the flap at the top, fold the top portion (1 inch) downwards along the line you marked. This will be your envelope's flap.
Crease the fold firmly to ensure a sharp, neat line. This step might take a few attempts to get right, so don't be discouraged if it isn't perfect on your first try.
Fold the Sides
Next, fold the sides of the envelope blank inwards along the vertical edges (6.5 inches). The folded edges should meet at the centerline, concealing the open side of the pocket.
Crease these folds firmly as well. You might want to hold your envelope blank up to a light source to ensure everything lines up neatly during this step.
Prepare to Seal the Envelope
Almost there! The final steps ensure that your envelope stays sealed and maintains its shape.
With the envelope blank still flat, apply glue or double-sided tape along the inner edges of the side folds. Don't apply glue too close to the top to avoid it seeping onto the flap.
Secure the Sides
Carefully fold the side edges up and press them onto the glued or taped areas. Hold them in place for a few seconds to ensure a secure seal.
You might want to place a heavy object on the envelope while the glue or tape dries to ensure a strong bond. Remember to do this on a flat surface to avoid warping the envelope.
Fold and Seal the Bottom
Fold the bottom edge upwards and press it onto the glued or taped area at the envelope's base. This will seal the bottom edge of your envelope.
Once again, you might need to place a heavy object on the envelope while the glue or tape dries. Make sure to support the envelope evenly to avoid creating any lumps or unevenness.
And there you have it! Your very own custom 5x7 envelope. With a little practice, you'll be creating a variety of envelope sizes and styles to suit all your stationery needs. Happy crafting!"