You've curated beautiful memories with Shutterfly, and now it's time to showcase them elegantly in personalized envelopes. Adding Shutterfly envelope liners is an easy and effective way to enhance your correspondence, and here's a step-by-step guide to help you insert them perfectly.
Before you begin, ensure you have your Shutterfly envelope liners, a flat surface, and a few minutes of patience. The process is simple, but reading through these instructions first will save you time and ensure you achieve a professional finish.
Preparing Your Envelopes and Liners
Start by removing your Shutterfly envelope liners from their packaging. Make sure they are flat and free of any creases or folds. If your liners are creased, gently iron them on a low setting, or weigh them down with a book overnight to flatten them.
Next, prepare your envelopes. Ensure the envelope flap is open and that the envelope is laid flat. If your envelopes areinălready addressed and stamped, be careful not to smudge them while inserting the liners.
Measuring Your Liners
Before you insert the liners, ensure they match the size of your envelopes. Shutterfly liners come in standard sizes, but it's always a good idea to double-check. Measure the length and width of your envelopes, both inside and out, and compare them with your liner dimensions.
If your liners are slightly bigger than your envelopes, don't worry. It's better to have them a bit larger than too small. You can trim them gently with scissors, ensuring you leave enough liner to cover the envelope entirely when inserted.
Peeling the Liner
Gently peel the backing from your Shutterfly liner. Be careful not to tear it, as this will compromise the finished look of your envelope. If you're having trouble, you can use a pair of tweezers to lift a corner of the backing, making it easier to grip and peel.
Peel the backing slowly and steadily, ensuring the liner remains flat and doesn't start to curl. If it does, lay it back down, smooth it out, and continue peeling more slowly.
Inserting the Envelope Liner
Now that your liner is peeled and measured, it's time to insert it into your envelope. Start by matching the top of the liner with the top of the envelope. Ensure it's level, with no bulges or bumps, to create a smooth, professional finish.
Use a ruler or your fingers to lightly press the liner along the top edge of the envelope. This will help it adhere firmly and create a neat, flat edge.
Aligning the Liner
Once the top edge is secure, use your fingers or a bone folder to carefully smooth out the liner. Be sure to press down any bumps or bubbles, ensuring the liner is smooth and flat. This will prevent any unsightly wrinkles or bulges from showing through your envelope once it's mailed.
Next, align the sides of the liner with the sides of your envelope. If your envelope has a window, be sure to leave enough liner to cover it, but not so much that it obstructs the window.
Folding the Liner
Finally, it's time to fold the liner to match the shape of your envelope. Gently crease the liner as you would an envelope, starting at the side folds and working your way towards the flap. Be careful not to tear the liner, and remember that it's easier to make small folds than to try and correct a large one.
Once your liner is fully creased, press it gently to ensure it stays in place. Your Shutterfly envelope liner is now ready for your To and From addresses, and your customized envelope is ready to send.