When it comes to metric screw taps, the size can greatly impact your project's results. Selecting the wrong drill size can lead to stripped threads, damaged tools, and wasted materials. Here's a comprehensive guide to help you understand drill sizes for metric taps and ensure successful threading.
Understanding metric taps begins with recognizing that they are measured in millimeters (mm) instead of inches. The tap size represents the major diameter of the tap, or the largest portion of the thread. For example, an M6 tap has a major diameter of 6mm.
Drill Sizes for Taps
The primary purpose of a drill before tapping is to create a pilot hole that is smaller than the tap's minor diameter. This allows the tap to cut threads effectively without breaking off or binding. Always choose a drill bit that is slightly smaller than the recommended size for your tap to ensure a proper fit.
Here's a table to guide you in selecting the appropriate drill size for common metric taps:
| Tap Size (M) | Drill Size (mm) |
|---|---|
| M3 | 2.0 |
| M4 | 2.5 |
| M5 | 3.0 |
| M6 | 3.5 |
| M8 | 4.5 |
| M10 | 5.5 |
| M12 | 6.5 |
| M16 | 8.0 |
| M20 | 10.0 |
Drilling Techniques for Taps
Proper drilling technique is crucial for successful tapping. Always use a sharp, high-quality drill bit designed for metal. Clamp your work securely to prevent movement during drilling. Apply a small amount of cutting oil or lubricant to the bit before starting to reduce friction and heat.
Begin by drilling approximately 75% of the desired hole depth. Retract the drill bit slightly, apply more lubricant, and then finish the hole to the full depth. This two-step process helps prevent the drill bit from wandering and breaking.
Tapping Techniques
After drilling, use a tap that is slightly smaller than the drill bit used. Keep the tap perpendicular to the work surface to ensure straight threads. Apply cutting oil or lubricant to the tap before starting. Turn the tap by hand for the first few revolutions to cut the initial threads, then use a tap handle or wrench to complete the cut.
Never force or jam the tap. If you encounter resistance, reverse the tap slightly, apply more lubricant, and try again. Keep the tap straight and maintain even pressure throughout the threading process. Once complete, back the tap out to break the threads free and remove it from the hole.
Tap Sizes and Thread Pitch
The pitch of a thread refers to the distance between the crests of the threads. In metric taps, the pitch is often indicated by a number following the 'M'. For example, an M6 x 1 tap has a major diameter of 6mm and a pitch of 1mm.
Understanding the pitch is essential for selecting the correct drill size. The general rule is to choose a drill bit that is slightly smaller than the tap's minor diameter, which is equal to the major diameter minus twice the pitch. Here's a table to help you determine the minor diameter for common metric taps:
| Tap Size (M) | Pitch (mm) | Minor Diameter (mm) |
|---|---|---|
| M3 | 0.5 | 2.5 |
| M4 | 0.707 | 3.29 |
| M5 | 1.0 | 4.0 |
| M6 | 1.0 | 5.0 |
| M8 | 1.25 | 6.75 |
| M10 | 1.5 | 8.0 |
| M12 | 1.75 | 10.5 |
| M16 | 2.0 | 14.0 |
| M20 | 2.5 | 17.5 |