When dealing with metalworking and engineering projects, knowing the drill and tap sizes is crucial to ensure correct drilling and threading. A drill and tap chart, also known as a drill and thread size chart, provides a comprehensive guide for selecting appropriate drill and tap sizes based on the desired screw size and material.
These charts are often standardized across various industries to maintain consistency and precision in manufacturing, assembly, and fabrication processes. The most common drill and tap charts follow the Unified Thread Standard (UTS), established by the United States federal government, which harmonizes thread standards for both NATO and US applications.
The Unified Thread Standard (UTS) Drill and Tap Chart
The UTS drill and tap chart is widely used in the United States and many other countries. It covers a broad range of thread series and sizes, including coarse, fine, and extra-fine pitches.
The chart offers a convenient reference for determining drill sizes based on the intended screw or bolt size, pitch, and material. For instance, if you're working with a #10-32 UNC (Unified National Coarse) bolt, a UTS drill and tap chart will tell you that you need to use a #29 bit for drilling and a #10-32 tap for threading.
Drill Sizes
Drill sizes in the UTS chart are primarily determined by the intended screw or bolt size. The chart provides drill sizes in fractions of an inch, which correspond to the required hole size to accommodate the desired thread.
For example, a #12-24 UNC bolt requires a #31 drill (equivalent to 7/64 inch) to create a hole that can later be tapped to accept the bolt. Here are a few more examples from the UTS drill size chart:
- #6-32 UNC: #21 drill (equivalent to 5/32 inch)
- 1/4"-20 UNC: #10 drill (equivalent to 1/4 inch)
- 3/8"-16 UNC: #5 drill (equivalent to 3/8 inch)
Tap Sizes
Tap sizes in the UTS chart are directly linked to the screw or bolt size and pitch. Taps create the internal thread that allows bolts and screws to be securely fastened.
For instance, a #10-32 tap is used to cut the internal thread for a #10-32 UNC bolt. Similarly, a 1/4"-20 tap is used for a 1/4"-20 UNC bolt. The UTS tap size chart provides a clear reference for selecting the appropriate tap based on the desired bolt or screw size and pitch.
International Organization for Standardization (ISO) Drill and Tap Chart
The ISO drill and tap chart is widely used in many European and international applications. It follows the ISO metric system, which uses millimeters for measurements and offers a smaller number of thread series compared to the UTS chart.
The ISO chart provides a direct relationship between the intended screw or bolt size and the required drill and tap sizes. For example, an M6 x 1.00 bolt requires an M6 drill and an M6 x 1.00 tap.
Drill Sizes in Metric System
In the ISO drill and tap chart, drill sizes are expressed in millimeters, with the drill size being equal to the intended bolt or screw size. For instance, an M8 bolt requires an M8 drill.
The ISO drill size chart simplifies the drilling process by eliminating the need to calculate drill sizes based on bolt or screw size, as is required in the UTS chart.
Tap Sizes in Metric System
Tap sizes in the ISO chart also correspond directly to the intended bolt or screw size. For example, an M8 x 1.25 bolt requires an M8 x 1.25 tap.
Similar to the drill sizes, the ISO tap size chart simplifies the threading process by directly associating tap sizes with bolt or screw sizes.
Whether you're working with the UTS or ISO drill and tap chart, it's essential to have a clear understanding of your application's requirements, including the desired screw or bolt size, pitch, and material. Keep these charts readily available to ensure accurate drilling and threading, resulting in a more precise and efficient manufacturing process.