✦Template Printable Ideas Insights

Cheap DIY NAS Build: Maximize Storage on a Budget

By

A Network-Attached Storage (NAS) device can be a game-changer for your home network, offering centralized storage, backup solutions, and media streaming. But buying one can be expensive. Building your own DIY NAS, however, can be a cost-effective and rewarding solution. Let's explore the cheapest way to build your own NAS system.

Before we dive into the components, understand that building a DIY NAS involves some basic technical knowledge. If you're comfortable with assembling a computer and navigating through interfaces, you're good to go. Let's start with the basics.

Understanding the Components

The foundation of your DIY NAS is a single-board computer (SBC), often called a barebones board. It's the brain of your NAS, similar to your computer's motherboard.

Building the Ultimate Pi 5 NAS: Easy Drive Swapping #techtok #raspberrypi5 #tech #nas
Building the Ultimate Pi 5 NAS: Easy Drive Swapping #techtok #raspberrypi5 #tech #nas
Building A DIY NAS On A Budget - TrueNAS Scale
Building A DIY NAS On A Budget - TrueNAS Scale
the inside of a computer case on a desk
the inside of a computer case on a desk

Next, you'll need storage drives. These can be HDDs (Hard Disk Drives) for larger capacity and lower cost, or SSDs (Solid State Drives) for faster performance and higher cost.

Choosing a Single-Board Computer

The Raspberry Pi is a popular choice for DIY NAS due to its low cost and hackability. The Raspberry Pi 4 Model B, priced around $55, is a solid option with sufficient horsepower for NAS tasks. For a bit more power, consider the ODROID-HC2 ($89), which offers more RAM and better performance.

DIY NAS: 2025 Edition
DIY NAS: 2025 Edition
DIY NAS and PLEX Server Build with HW Transcoding
DIY NAS and PLEX Server Build with HW Transcoding
Build a Custom PC Case with Unique Mods and Designs
Build a Custom PC Case with Unique Mods and Designs

Remember, the SBC is just the brain. You'll also need a case, power supply, and storage drives, which we'll go over next.

Storage Drive Options

HDDs are cheaper and offer larger capacities. A 2TB HDD costs around $50-$60, making it an attractive option for budget builds. For SSDs, you're looking at around $100 for 1TB. SSDs offer faster performance, making them a better choice for media streaming or intensive file operations.

Bear in mind, you'll need to calculate the total storage capacity you require and choose drives accordingly. ReadyNAS OS, which we'll use in this build, supports up to 16 drives.

DIY NAS vs. Pre-Built NAS: Which Is Best?
DIY NAS vs. Pre-Built NAS: Which Is Best?
DIY Computer Case - How To Build A Computer Case
DIY Computer Case - How To Build A Computer Case
an open laptop computer sitting on top of a table
an open laptop computer sitting on top of a table
Part 1: Building A 'Mini' 100TB NAS
Part 1: Building A 'Mini' 100TB NAS
How to Make a 6TB NAS for About $300, Easy Anyone Can Do!
How to Make a 6TB NAS for About $300, Easy Anyone Can Do!
Budget Storage Server 2021! | 80TB NAS
Budget Storage Server 2021! | 80TB NAS

Setting Up Your DIY NAS

Now that you have your components, let's set up your DIY NAS. The first step is to install an operating system tailored for NAS use. SNAS (SmartNAS) or ReadNAS OS are both excellent choices, offering user-friendly interfaces and NAS-specific features.

For this guide, we'll use ReadNAS OS. It's a free, open-source NAS operating system designed for small to medium NAS builds. It supports both the Raspberry Pi and ODROID-HC2.

Installing ReadyNAS OS

First, download ReadyNAS OS from their official site. Then, using balenaEtcher or a similar tool, flash the image onto a microSD card. Insert the microSD card into your SBC, connect your drives, power up, and away you go!

ASUSTOR NAS with 6x NVMe SSDs 🔊 #asmr
ASUSTOR NAS with 6x NVMe SSDs 🔊 #asmr
Turn your 10″ Homelab into a NAS with 3D Printable Shelves - The DIY Life
Turn your 10″ Homelab into a NAS with 3D Printable Shelves - The DIY Life
DIY Rackmount NAS - 2U PC Case - for 10
DIY Rackmount NAS - 2U PC Case - for 10

Once booted, you can access your NAS via web interface. Here, you can set up users, shares, and services, turning your DIY NAS into a fully functional storage powerhouse.

Accessing and Expanding Your DIY NAS

To access your DIY NAS, point your web browser to its IP address. You can do this via your router's DHCP list or using DHCP reservation. Once connected, you can set up shares, users, and services, like a traditional NAS.

Want to expand your storage? No problem! Add more drives, and ReadyNAS OS will automatically recognize and integrate them. It supports RAID, JBOD, and volume combinations, offering robust data protection.

And there you have it! Your very own, cost-effective DIY NAS. With just a few components and some simple setup, you've created a powerful home network storage solution. Happy building! Next step? Exploring advanced NAS functions and customizations.